 |
 |
| Description |
High temperature resistant siliconed paint.
|
| Application Areas |
At the temperatures around 600° C only itself, at relativerly low temperatures around 400° C can be applied with zinc silicat paints as finish paint.
|
| Storage |
Should be stored in cool, well ventilated, and prevented from high temperature places.
|
| Package |
5 lt / 30 lt
|
 |
| Color |
Aluminium, smoke
|
| Solid Matterial (volume) |
% 35 (+/- 2)
|
| Density |
0,9 - 1,2 gr/cm3
|
| Drying Time |
Depends on air circulaiton, environment temperature and film thickness.
|
| Flash Point |
25° C (+/- 2)C
|
| Brilliance |
Aluminium bright or half matt
|
 |
| Mixture |
One component
|
| Thinner / Cleaning Solvent |
Special thinner
|
| Airless Pistol Data |
Hydrolic Pressure
(At the jet) |
: 15 Mpa |
| Jet |
: 0,38 - 0,48 mm |
| Spraying Angle |
: 40° - 80° |
| Filter |
: Should be clean. |
|
|
|
 |
| Surface Preparation |
Sanding ar Sa 2.5.
|
| Application Conditions |
Surface temperature must be at least 3° C higher than the air condensation temperature.
|
| Recommended Painting System |
Silicon Based Heat Resistant Paint: 1-2x20 micron
|
| Working Conditions |
Should be used in well ventilated places by spraying. Follow S2 and S7 instructions.
|
| Application Method |
Applied with airless pistol, or in small areas with brush.
|
|
Film Thickness
(Micron/coat) |
Theoretical
Spreading |
| Dry |
Wet |
(m2/lt) |
| Applicable Film Thickness |
|
|
|
| Recommended |
20-30 |
50-70 |
12,7 |
| Surface Temperature |
Surface Drying |
Hard Drying 2 |
Complete Curing |
Second Coat |
5° C
10° C
23° C
|
60 minutes
60 minutes
30 minutes
|
4 hours
3 hours
3 hours
|
6 hours
24 hours
12 hours
|
36 hours
24 hours
12 hours
|
|
|
