 |
 |
| Description |
Alkyd resine based, anti-rust undercoat paint.
|
| Application Areas |
Applies on steel Surfaces as undercoat.
|
| Storage |
Should be stored in cool, well ventilated, and prevented from high temperature places.
|
| Package |
5 lt / 20 lt
|
 |
| Color |
Gray, red
|
| Solid Matterial (volume) |
% 52 (+/- 2)
|
| Density |
1,2 - 1,4 gr/cm3
|
| Drying Time |
Depends on air circulaiton, environment temperature and number of coats applied.
|
| Flash Point |
32° C (+/- 2)
|
| Brilliance |
Matt
|
| Color Endurance |
Good
|
 |
| Mixture |
% 35
|
| Thinner / Cleaning Solvent |
Synthetic thinner
|
| Airless Pistol Data |
Hydrolic Pressure
(At the jet) |
: 15 Mpa |
| Jet |
: 0,38 - 0,53 mm |
| Spraying Angle |
: 40° - 80° |
| Filter |
: Should be clean. |
|
|
|
 |
| Surface Preparation |
Surfaces must be well cleaned, dry and defectless. Sanding at SQ 2.5 or mechanical cleaning at St 2 recommended.
|
| Application Conditions |
Surface temperature must be at least 3° C higher than the air condensation temperature.
|
| Recommended Painting System |
Synthetic undercoat: 2x40 micron Synthetic lux paint: 1x40 micron
|
| Working Conditions |
Should be applied in well ventilated environments by spraying. In case of contact with eye immediately wash with Su and request medical consultation.
|
| Application Method |
Applied with airless pistol or with roller.
|
|
Film Thickness
(Micron/coat) |
Theoretical
Spreading |
| Dry |
Wet |
(m2/lt) |
| Applicable Film Thickness |
30-50 |
60-95 |
16,2-9,4 |
| Recommended |
40 |
75 |
10 |
| Surface Temperature |
Surface Drying |
Hard Drying 2 |
Second Coat |
Coat 3 |
| Min. |
Max. |
5° C
10° C
23° C
|
3,5 hours
3,5 hours
2,5 hours
|
16 hours
8 hours
4 hours
|
12 hours
8 hours
4 hours
s |
|
|
|
