 |
 |
| Description |
Ure-melamine resin based, furnace procesed undercoat.
|
| Application Areas |
Applied in metal industry.
|
| Storage |
Should be stored in cool, well ventilated, and prevented from high temperature places.
|
| Package |
20 lt CompA / 5 lt CompB / 1 lt CompA / 0,200 lt CompB
|
 |
| Color |
Gray, yellow
|
| Solid Matterial (volume) |
% 50 (+/- 2)
|
| Density |
1,2 - 1,4 gr/cm3
|
| Drying Time |
Depends on air circulaiton, environment temperature and film thickness.
|
| Flash Point |
30° C
|
| Brilliance |
Half matt
|
| Color Endurance |
Good
|
 |
| Mixture |
% 30
|
| Thinner / Cleaning Solvent |
Furnace paint thinner
|
| Airless Pistol Data |
Hydrolic Pressure
(At the jet) |
: 15 Mpa |
| Jet |
: 0,38 - 0,53 mm |
| Spraying Angle |
: 40° - 80° |
| Filter |
: Should be clean. |
|
|
|
 |
| Surface Preparation |
Surfaces should be well cleaned, and oil, dirt and rust free.
|
| Application Conditions |
Surface temperature must be at least 3° C higher than the air condensation temperature. Since the curing considerably decreases at low temperatures, the temperature should be at least 10° C .
|
| Recommended Painting System |
Furnace Undercoat: 2x50 micron Furnace Finish Paint: 1x50 micron
|
| Working Conditions |
Follow the instructions on the package. Avoid inhaling the vapor directly and avoid contact with skin.
|
| Application Method |
Applied with air or airless pistol.
|
|
Film Thickness
(Micron/coat) |
Theoretical
Spreading |
| Dry |
Wet |
(m2/lt) |
| Applicable Film Thickness |
|
|
|
| Recommended |
40-60 |
70-80 |
8 |
| Surface Temperature |
Surface Drying |
Hard Drying 2 |
Complete Curing |
Second Coat |
10° C
23° C
35° C
|
120 minutes
60 minutes
30 minutes
|
14 hours
6,5 hours
4 hours
|
14 days
7 days
3 days
|
8 hours
4 hours
2 hours
|
|
|
