 |
 |
| Description |
Two component undercoat, enriched with zinc particles.
|
| Application Areas |
Suitable for steel Surfaces.
|
| Storage |
Should be stored in cool, well ventilated, and prevented from high temperature places.
|
| Package |
13,5 lt CompA / 4,5 lt CompB
|
 |
| Color |
Gray
|
| Solid Matterial (volume) |
% 53 (+/- 2)
|
| Density |
2,4 - 2,6 gr/cm3
|
| Drying Time |
Depends on air circulaiton, environment temperature, film thickness and the number of coats applied.
|
| Flash Point |
27° C (+/- 2)
|
| Brilliance |
Matt
|
 |
| Mixture |
3 volume CompA + 1 volume CompB
|
| Mixture Applicable For |
1-2 days (Decreases at high temperatures)
|
| Thinner / Cleaning Solvent |
Epoxy thinner
|
| Airless Pistol Data |
Hydrolic Pressure
(At the jet) |
: 15 Mpa |
| Jet |
: 0,38 - 0,53 mm |
| Spraying Angle |
: 40° - 80° |
| Filter |
: Should be clean. |
|
|
|
 |
| Surface Preparation |
Scraping at Sa 2.5
|
| Application Conditions |
Temperature and relative humidity should be checked. To prevent heavy zinc pigments from precipitation the paint should be stirred during the application.
|
| Recommended Painting System |
Zinc enriched undercoat: 1x25 micron
Finish paints can be chlore rubber, vinyl, acrylic or epoxy paints.
|
| Working Conditions |
Follow the instructions on the package. Avoid inhaling the vapor directly and avoid contact with skin.
|
| Application Method |
Applied with airless pistol, or in small areas with brush.
|
|
Film Thickness
(Micron/coat) |
Theoretical
Spreading |
| Dry |
Wet |
(m2/lt) |
| Applicable Film Thickness |
25-60 |
45-115 |
5,0-2,0 |
| Recommended |
40 |
75 |
3,3 |
| Surface Temperature |
Surface Drying |
Hard Drying 2 |
Second Coat |
Coat 3 |
| Min. |
Max. |
5° C
10° C
|
50 minutes
20 minutes
|
3 hours
2 hours
|
10 days
7 days
|
3 hours
2 hours
|
|
|
